1999 1998 1997 1996 1995 1994 1993 1992 1991
1999
(Back to MMT Publications)
Conversion Internal Tech Memos - 1999
- CITM-99-1
Dynamic Measurements of the MMT f/9 Secondary Pneumatic Support System
Hollis Ambrose - CITM-99-2
Magellan Project 6.5 Meter Telescope Hardpoint Counterweight Design Layouts
Steve Gunnels
Conversion Tech Memos - 1999
- CTM-99-1
6.5 m Instrument Rotator Performance Goals and Specifications, Rev. 2 (See Rev 3, CTM-00-1)
D. Clark, S. Callahan, J. T. Williams - CTM-99-2
A High-Precision Differential-Thermocouple Temperature Measurement System for the 6.5m MMT Primary Mirror
S. C. West, P. Spencer, S. Callahan
Internal Tech Memos - 1999
- ITM-99-1
Mt. Hopkins Sky Brightness
N. Caldwell, C. Foltz, P. Berlind
Tech Memos - 1999
- TM-99-1
Meteorological Data for Mt. Hopkins
A. A. E. Milone, C. Heller, J. McAfee
1998
(To MMT
Publications)
(To Top of Page)
Conversion Internal Tech Memos - 1998
- CITM-98-1
Hardpoint Counterbalancing Archive - CITM-98-2
Mechanical Support Design for the M2/F15 Adaptive Secondary Unit
W. Gallieni
Conversion Tech Memos - 1998
- CTM-98-1
Wind Distortion of the MMT Primary and f/9 Secondary Mirrors, Rev 1
B. Cuerden - CTM-98-2
The f/9 Hexapod Actuator Acceptance Testing
ADS Italia - CTM-98-3
6.5 m Instrument Rotator Performance Goals and Specifications (See Rev. 2, CTM-99-1 and Rev. 3, CTM-00-1)
D. Clark, S. Callahan, J. T. Williams
1997
(To MMT
Publications)
(To Top of Page)
Conversion Internal Tech Memos - 1997
- CITM-97-1
Single Axis Actuator Overhead Forces and Pressure Relief Valves
Shawn Callahan, Brian Cuerden - CITM-97-2
Hardpoint Platform Matrices for the MMT 6.5-m Primary Mirror Cell
S. C. West - CITM-97-3
Optical Positions Vs. Optical Manufacturing Uncertainties for the MMT
Steve West - CITM-97-4
Initial Results from Primary Mirror Cell Dynamic Impulse Test
Steve West
Conversion Tech Memos - 1997
- CTM-97-1
6.5-m Ventilation System: Exhaust Ejector Performance Test Results
P. Benjamin, S. Callahan - CTM-97-2
Polishing Specifications for the MMT F/9 Secondary Mirror
S. West
1996
(To MMT
Publications)
(To Top of Page)
Conversion Tech Memos - 1996
- CTM-96-1
A Hardpoint Length Calculator for the MMT Conversion
S. C. West - CTM-96-2
The Position Actuators (Hard Points) of the 6.5m Borosilicate Honeycomb Primary Mirrors
L. Miglietta, S. Callahan - CTM-96-3
Summary of Vacuum Tests at TIW (7/24/95 - 8/4/95)
W. Kindred - CTM-96-4
Seeing Improvements Resulting from Improved Chamber Ventilation
C. Foltz
1995
(To MMT
Publications)
(To Top of Page)
Conversion Internal Tech Memos - 1995
- CITM-95-1
Upper Hardpoint Flexure Analysis
Shawn Callahan, James Catone - CITM-95-2
Procedure for Metrology and Mounting of Force Actuators and Static Supports in the MMTO/6.5-m Primary Mirror Cell
J. T. Williams
Conversion Tech Memos - 1995
- CTM-95-1
Calibration of the Actuator Test Stand
S. C. West
1994
(To MMT
Publications)
(To Top of Page)
Conversion Tech Memos - 1994
- CTM-94-1
Contact Stress on the 6.5 m Mirror Due to Thermal Expansion
S. Callahan - CTM-94-2
Two-Puck Load Spreader: Stress Due to Ball Decoupler Failure
S. Callahan - CTM-94-3
Destructive Stress Tests of the 6.5 m Loadspreader Flexures
S. Callahan, M. McEuen - CTM-94-4
Static Support Deflection Analysis
S. Callahan - CTM-94-5
Analysis of the Hardpoint Attachment to the 6.5m Mirror
S. Callahan
1993
(To MMT
Publications)
(To Top of Page)
Conversion Tech Memos - 1993
- CTM-93-1
Analysis and Design of the Glue Joint, Pucks, and Loadspreader Used in the 6.5 m Mirror Support System
S. Callahan
Internal Tech Memos - 1993
1992
(To MMT
Publications)
(To Top of Page)
Conversion Tech Memos - 1992
- CTM-92-1
Design Summary of the 6.5 m Telescope Instrument Rotator Control System using a Tape Feedback Encoder
S. Groff - CTM-92-2
Image Processing System Description and Specifications for the 6.5 m Telescope
I. Scott-Fleming, C. Foltz, A. Poyner - CTM-92-3
Limits of a 2.2m Stressed Lap Baseplate on the MMT and Columbus Mirrors
S.C. West, W.B. Davison - CTM-92-4
Interferometric Metrology for a 6.5-meter F/1.25 Paraboloidal Mirror
J.H. Burge
Internal Tech Memos - 1992
- ITM-92-1
Upgrade to the Instrument Rotator Electronics
S. Groff, J.T. Williams - ITM-92-2
Procedure for Preloading Building Drive Wheel Bearings - Technique used March 6, 1992
S. Callahan, J.T. Williams - ITM-92-3
Frame Grabber Seeing, Pointing, and Tracking Documentation
I.C. Scott-Fleming
Tech Memos - 1992
- TM-92-1
Coordinate Transformations at the MMTO
A.D. Poyner - TM-92-2
Adaptive Optics at the MMT
R. Angel, P. Christophorov, R. Dekany, R. Kupke, M. Lloyd-Hart, B. McLeod, I. Scott-Fleming, T. Trebisky, D. Wittman, P. Wizinowich - TM-92-3
"cats" The MMT Catalog Browser
A. Poyner
1991
(To MMT
Publications)
(To Top of Page)