2010 2009 2008 2005 2004 2003 2002 2001 2000
2010
(Back to MMT Publications)
Tech Memos - 2010
- TM-10-1
Calibration and Correction of Amplifier Induced Artifacts in an Interleaved InSb Infrared Array
M. A. Kenworthy and P. M. Hinz
2009
(Back to MMT Publications)
Internal Tech Memos - 2009
- ITM-09-1
Elevation Servo Review Committee Report
T. Pickering, P. Cheimets, S. Schaller, J. Hagen, D. Harvey - ITM-09-2
Elevation Tracking for the 3rd Trimester of 2008
D. Clark, T. Trebisky, T. Pickering - ITM-09-3
Azimuth Tracking for the 3rd Trimester of 2008
D. Clark, T. Trebisky, T. Pickering - ITM-08-1
Minimum Daily Ambient Air Temperatures at the MMT Observatory, Mt. Hopkins, Arizona, December 2003 through January 2008
J.D. Gibson, D. Clark, B. Comisso, T. Gerl, C. Knop, R. Ortiz, T. Pickering, D. Porter, D. Smith, P. Spencer, T. Trebisky, K. Van Horn, G.Williams, J.T. Williams - ITM-08-2
MMT Primary Mirror Ventilation System Temperatures Versus Carrier Chiller Setpoint Values: A Linear Regression Analysis, January through December, 2007
J.D. Gibson, D. Clark, B. Comisso, T. Pickering, G. Williams, S. Callahan, C. Chute, T. Gerl, C. Knop, R. Ortiz, D. Smith, T. Trebisky, K. Van Horn, B. Stangret, J.T. Williams - ITM-05-1
Generation III Aluminizing Power Supplies - A Test Report
D. Clark - ITM-05-2
Hazardous Chemical Procedures at MMT Observatory -- Initial Release
W. Kindred - ITM-05-3
Primary Mirror Actuators Test Report
D. Clark - ITM-04-1
Pointing/Derotator Coalignment for Alt-Az Telescopes
G. Schmidt - ITM-04-2
MMT Primary Mirror Wash Results of May 11, 2004
W. Kindred - ITM-04-3
Control System Prototyping -- A Case Study
D. Clark - ITM-04-4
Re-Evaluation of Aluminum Thickness Distribution on the MMT 6.5m Primary Mirror using New Software
W. Kindred - ITM-03-1
MMT F/5 Baffles and Double Reflections
N. Caldwell and B. McLeod - ITM-03-2
Aluminizing the MMT F/5 Secondary Mirror
B. Kindred - ITM-03-3
Stewart Platform Matrices for the 6.5m MMT
S. C. West - ITM-03-4
Science Instrument Interface Control Document for the MMT
D. Blanco and G. Schmidt - ITM-03-5
Selected Results of Recent MMT Servo Testing
D. Clark - ITM-03-6
Effects of CO2 Cleaning and Detergent Washing on Specular and Diffuse Reflectance of the MMT 6.5m Primary Mirror (Addendum to ITM-02-1)
W. Kindred - TM-03-1
Fall 2002 F/9 Optical Performance of the 6.5m MMT Analyzed with the Top Box Shack-Hartmann Wavefront Sensor
S. West - TM-03-2
Test Report for MMT F/5 Secondary Mirror
Steward Observatory Mirror Lab - TM-03-3
Status of Pointing of the 6.5m MMT
T. Trebisky, C. Foltz, S. West - TM-03-4
Modifications to the f/9 Secondary Mirror Hardpoints
S. C. West, S. P. Callahan, R. James, D. Clark, C. Wainwright, K. Van Horn - TM-03-5
Segmented Zero-Deviation Cross-Dispersion Prisms for the Hectochelle Multiobject Spectrograph
D. G. Fabricant, A. Szentgyorgyi, H. W. Epps - TM-03-6
F/9 Top-Box Shack-Hartmann: Practical Design and Implementation
S. C. West, S. P. Callahan, R. James, P. Spencer, H. Olson, B. Kindred, R. Ortiz, T. Pickering - TM-03-7
Evaluation of Thermal Performance for the MMT Primary Mirror During January 2003
J. D. Gibson - TM-03-8
In Situ Aluminization of the MMT 6.5m Primary Mirror
W. Kindred, J.T. Williams, D. Clark - ITM-02-1
Effects of CO2 Cleaning and Detergent Washing on Specular and Diffuse Reflectance of the MMT 6.5m Primary Mirror
(See addendum, ITM-03-6)
W. Kindred - ITM-02-2
MMT Mount Control System Operation and Performance
D. Clark - ITM-01-1
Secondary Mirrors Support: M2/F5 Hexapod Data Package
ADS International s.r.l. - ITM-01-2
Secondary Mirrors Support: M2/F5 Hexapod Design Kinematics Algorithm
ADS International s.r.l. - TM-01-1
Baseline Shack Hartmann Design for the 6.5m MMT f/9 Focus
S. C. West, H. Olson - CITM-00-1
MMT f/5 Wind Loading, Supports at Support Sector Centroids
B. Cuerden - CITM-00-2
MMT f/9 Secondary, Fan Balancing Requirement
B. Cuerden - CITM-00-3
MMT f/9 Secondary Mirror Installation into Cell
B. Cuerden - CTM-00-1
6.5 m Instrument Rotator Performance Goals and Specifications, Rev. 3
D. Clark, S. Callahan, J. T. Williams - CTM-00-2
Correcting 6.5m Primary Mirror Figure Errors with the Active Supports
S. C. West, H. M. Martin - CTM-00-3
6.5m MMT f/9-f/15 Hexapod Laboratory Calibration
S. C. West, D. Fisher, P. Spencer, T. Trebisky, B. Hille, G. Weir - CTM-00-4
Expected Wavefront Errors Due to f/5 Secondary Test Plate
B. Martin - CTM-00-5
MMT Conversion f/9 Secondary Assembly Procedure
S. C. West, R. Allen - ITM-00-1
VATT Optical Performance During 98 Oct as Measured with an Interferometric Hartmann Wavefront Sensor
S. C. West, D. Fisher, M. Nelson
2008
(Back to MMT Publications)
Internal Tech Memos - 2008
2005
(Back to MMT Publications)
Internal Tech Memos - 2005
2004
(To MMT
Publications)
(To Top of Page)
Internal Tech Memos - 2004
2003
(To MMT
Publications)
(To Top of Page)
Internal Tech Memos - 2003
Tech Memos - 2003
2002
(To MMT
Publications)
(To Top of Page)
Internal Tech Memos - 2002
2001
(To MMT
Publications)
(To Top of Page)
Internal Tech Memos - 2001
Tech Memos - 2001
2000
(To MMT
Publications)
(To Top of Page)