Page not found

The forward frame was taken up the mountain by Sierrita Mining and Ranching. After arriving at the Summit, it was removed from the flatbed using the FLWO crane.

On the previous day, the dummy mirror was loaded on the transport trailer and waits at the basecamp. It will be taken to the summit and installed in the mirror cell after Labor Day.

Images of the progress on the assembly of the cell, e.g. drive arcs, etc., are also included.

• The forward frame in the early morning light, ready to leave the basecamp.
• On the dirt road.
• Stopping to check the chains.
• The final pull...
• ... up the heated road
• The load arrives at the MMT.
• Lowered onto the ground. The frame will next be lowered flat and the trusses attached to it.
• Lowering the dummy onto the transport rig.
• Gabe, JT and Phill.
• Rigged and ready.
• Phill checks one of the brake assemblies.
• Under the cell with the drive arcs attached.
• One of the new elevation drive motors.
• The counterweights on the south side of the cell.
• Another view of a drive arc.